heat pump with modular design

GSWW60 is modular designed unit which can be easily combinated into any size system at the project spot. Maximun 64units can be connected together for the largest 3840KW capacity.

Adopting victaulic grooved connection for the water pipe junction between units makes the connection work easier to bbe finished. The control system could automatically turn on or off the unitsaccording to the actual load demand
 
 

·Galvanized sheet 

·Adopt Simens Polycool controller 

·Victaulic grooved connection

·Small compact design with light weight for the　single　unit makes the lifting and transportation much easier.

·Easy intelligent energy control

·Easy maintenance

·Choice of language
  
    
Installation   
    
 
  
Technical Parameter  
  
Heat pump Type GSWW60 
Dimensions,weights,connection dimensions 
Dimensions HxWxD 1620x550X1250 
Weight kg 420 
Refrigerant Type R407C 
Filling weight kg 10 
Permissible operating pressure Mpa 3 
Pipe connector-hot side Inch G4” 
Pipe connector-cold side Inch G4” 
Evaporator Type Brazed plate heat exchanger 
Condenser Type Brazed plate heat exchanger 
Compressor . 2xScroll 
Performance Heat pump 
Heat output at B0/W35(1) kW 60 
Power consumption kW 14.6 
Performance factor . 4.11 
Hot side volume flow(3) m3/h 10.4 
Cold side volume flow(4) m3/h 10.2 
Heat output at W10/W35(2) kW 77 
Power consumption kW 14.9 
Performance factor . 5.17 
Hot side volume flow m3/h 13.4 
Cold side volume flow m3/h 13.6 
Process medium .
Brine made from water with 33Vol.% ethylene glycol 
Power Type Triple phase 
Sound power level dB(A) 52 
(1)B0/W35=Brine water inlet temperature 0℃,heating flow 35℃ 
(2)W10/W35=Well water inlet temperature 10℃,heating flow 35℃ 
(3)Heating flow for 5K temperature span 
(4)Heat source flow for 4K temperature span